View Cart | Checkout


790 Duke General

Fly screenFly screen
Part no: 64108908144
Perfectly integrated with the sharp design lines of the 790 Duke.



Availability: To order, normally sent out in 2-5 days
Price: 78.00 (Inc VAT at 20%)

WindshieldWindshield
Part no: 64108908033
The windshield is recommended for longer trips.
It provides improved protection from the wind and relieves the upper body.



Availability: To order, normally sent out in 2-5 days
Price: 78.00 (Inc VAT at 20%)

FUEL TANK QUICK LOCKFUEL TANK QUICK LOCK
Part no: 93807908000
Refueling like the professionals: keyless and extremely quick.
Machined from high-grade aluminum with an anodized surface finish.
Not lockable.



Availability: To order, normally sent out in 2-5 days
Price: 130.50 (Inc VAT at 20%)

BRAKE LOCKBRAKE LOCK
Part no: 61012016000

Practical help when loading the bike or jacking it up with the rear wheel lifting device.



Availability: Stock item, normally sent out in 24-48 hrs
Price: 8.70 (Inc VAT at 20%)

KTM MY RIDE control unitKTM MY RIDE control unit
Part no: 64112966000
All smartphones and headsets already tested for compatibility are visible in the PDF-file under "documents".
The file will be constantly updated.

This control unit enables the feature KTM MY RIDE.

With KTM MY RIDE you can tether your smartphone to the bike via Bluetooth, giving you full control over incoming calls and an audio player. All the information pops up on the bike´s display and you manage this optional extra with the mode switch, keeping your hands where they belong. On the handlebar.



Availability: To order, normally sent out in 2-5 days
Price: 86.70 (Inc VAT at 20%)

TYRE PRESSURE MONITORING SYSTEMTYRE PRESSURE MONITORING SYSTEM
Part no: 64112932044
As the name implies, the TPMS monitors tire pressure (visible in the display) and warns the rider in the event of pressure loss, for example due to tire damage.



Availability: To order, normally sent out in 2-5 days
Price: 139.26 (Inc VAT at 20%)

CABLE RINGCABLE RING
Part no: 00029940000
Easy handling and operation
More safety
Less wear on the cord
Made of high quality material
Cable not included



Availability: To order, normally sent out in 2-5 days
Price: 26.22 (Inc VAT at 20%)

BRAKE BLEEDERSCREWBRAKE BLEEDERSCREW
Part no: 77013920000
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap.



Availability: To order, normally sent out in 2-5 days
Price: 34.20 (Inc VAT at 20%)

Low chassis kitLow chassis kit
Part no: 64112955044
25 mm lower seat height with unchanged ride dynamics.



Availability: To order, normally sent out in 2-5 days
Price: 252.18 (Inc VAT at 20%)

Footpegs systemFootpegs system
Part no: 64103937044
The CNC-machined footrest system made of high-strength aluminium is adjustable to 8 different positions allowing you to effortlessly find the perfect sitting position.

Anodized aircraft aluminium
Carbon heel guards included
Inverted shifting scheme possible by turning the standard relay lever
Change compared with the standard foot peg position:

0 – 20 mm higher
0 – 20 mm backwards



Availability: Stock item, normally sent out in 24-48 hrs
Price: 436.86 (Inc VAT at 20%)

Heated grip kitHeated grip kit
Part no: 64112964044
Warm hands, regardless of the weather!
Controlled directly via an additional control unit which will be mounted on the handlebar.



Availability: To order, normally sent out in 2-5 days
Price: 174.24 (Inc VAT at 20%)

USB power outlet kit 790USB power outlet kit 790
Part no: 64112950044
Easy accessible and convenient way to keep your electronic devices charged.

Mounting material included
With protection cover
Output voltage 5V/1.000 mA



Availability: To order, normally sent out in 2-5 days
Price: 42.96 (Inc VAT at 20%)

Handlebar end mirrorHandlebar end mirror
Part no: 64112940000
Made from black anodised aluminum
Ball-and-socket joint out of steel, for felxible adjustment of the miror
Including adapter for installation
1 part, can be mounted on both sides of the handlebar



Availability: To order, normally sent out in 2-5 days
Price: 86.70 (Inc VAT at 20%)

HANDLEBAR ENDS RIGHT+LEFT 05HANDLEBAR ENDS RIGHT+LEFT 05
Part no: 54802005000
Eliminates the need to replace your grips when your machine
ends up on the ground!



Availability: In stock
Price: 13.08 (Inc VAT at 20%)

GPS bracketGPS bracket
Part no: 64112992033
Suitable for all Garmin/TomTom GPS devices, the KTM GPS/PDA bag and the iBracket.



Availability: To order, normally sent out in 2-5 days
Price: 34.20 (Inc VAT at 20%)

SCHRADER VALVE CAP SET FLATSCHRADER VALVE CAP SET FLAT
Part no: 7771097605004
Orange anodised valve caps with valve opening function.



Availability: In stock
Price: 13.08 (Inc VAT at 20%)

SCHRADER VALVE SETSCHRADER VALVE SET
Part no: 7771097615004



Availability: To order, normally sent out in 2-5 days
Price: 8.70 (Inc VAT at 20%)

REPAIR KIT 56 GREPAIR KIT 56 G
Part no: 00062030058
The repair kit is a two-component, epoxy resin adhesive. Hardens at room temperature, accelerated hardening possible by raising temperature. Use: Particularly suitable for steel, but also for other metals, wood, concrete, ceramics, glass and most plastics. The steel bond is resistant to, among others things, oil, petrol, diesel and battery acid. Processing: Best results with clean and rough surfaces. Cut off required amount and knead for approx. 1 minute until uniform colour achieved. Use within 2 minutes. At first, it seems as if no adhesion is present. Nevertheless, press the adhesive mixture into the surface. Remove excess material. When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins. Smooth flat with water by hand for an even surface. Wash hands immediately with soap and water (or with Turbo cleaning towelette) on completion. Hardening commences after 5 to 10 minutes. The repaired part can be used again after as little as 60 minutes. The surfaces to be glued must be dry and free from dust and grease.



Availability: To order, normally sent out in 2-5 days
Price: 6.48 (Inc VAT at 20%)

ERGO PILLION SEATERGO PILLION SEAT
Part no: 64107947000

Visually a perfect match to the rider´s Ergo seat.



Availability: To order, normally sent out in 2-5 days
Price: 121.74 (Inc VAT at 20%)

Ergo seatErgo seat
Part no: 64107240000
Under the high-class cover you will also find high-tech equipment:

Seat hight increased by 20mm compared to the standard seat

The 3D structural mesh special foam with built-in tunnel form ensures even pressure distribution and thus increases seating comfort
The optimized shape provides more freedom for the legs and better contact with the motorcycle
Easy assembly



Availability: To order, normally sent out in 2-5 days
Price: 148.02 (Inc VAT at 20%)

Ergo seat Low 790 DukeErgo seat Low 790 Duke
Part no: 64107140000
Under the high-class cover you will also find high-tech equipment:

Seat hight reduced by 20mm compared to the standard seat

The 3D structural mesh special foam with built-in tunnel form ensures even pressure distribution and thus increases seating comfort
The optimized shape provides more freedom for the legs and better contact with the motorcycle
Easy assembly



Availability: To order, normally sent out in 2-5 days
Price: 148.02 (Inc VAT at 20%)

Ergo seatErgo seat
Part no: 64107940000
Under the high-class cover you will also find high-tech equipment:

Same seat hight like standard seat

The 3D structural mesh special foam with built-in tunnel form ensures even pressure distribution and thus increases seating comfort
The optimized shape provides more freedom for the legs and better contact with the motorcycle
Easy assembly



Availability: To order, normally sent out in 2-5 days
Price: 148.02 (Inc VAT at 20%)

Pillion seat coverPillion seat cover
Part no: 64107955044

Racing look in a matter of seconds, without any tools.



Availability: To order, normally sent out in 2-5 days
Price: 112.98 (Inc VAT at 20%)

REAR WHEEL LIFTING DEVICEREAR WHEEL LIFTING DEVICE
Part no: 69329955000
One of the following adapter versions (not included in scope of supply) is required for use: Workshop (69329955010), Universal (61029055130) or Universal V-adapter (610.29.955.244 / 610.29.955.144).



Availability: To order, normally sent out in 2-5 days
Price: 69.24 (Inc VAT at 20%)

UNIVERSAL RUBBER ADAPTERUNIVERSAL RUBBER ADAPTER
Part no: 69329955030



Availability: To order, normally sent out in 2-5 days
Price: 19.32 (Inc VAT at 20%)

TIE DOWNS WITH HOOKSTIE DOWNS WITH HOOKS
Part no: 77512950200
2 units. High-quality soft ties with rubberised fastening hooks and handlebar loops. In the KTM colours orange/black with KTM PowerParts logo.



Availability: To order, normally sent out in 2-5 days
Price: 34.20 (Inc VAT at 20%)

TIE DOWNSTIE DOWNS
Part no: 77512950300
Enables secure attachment to the machine without scratching your handlebars or tank
Made from durable ballistic nylon
Load capacity of 280 kg
With handlebar loops
With rubberized hooks on both belt ends



Availability: To order, normally sent out in 2-5 days
Price: 14.88 (Inc VAT at 20%)

TYRE GAUGE DIGITALTYRE GAUGE DIGITAL
Part no: 77329068000
Easy to use and fits all currently available valves with display in bar or psi. Integrated pressure release valve for accurate pressure adjustment. Switchable display and work area lighting. Battery saver mode with automatic switch-off. Max measurable pressure 11 bar/154 psi.



Availability: Stock item, normally sent out in 24-48 hrs
Price: 34.20 (Inc VAT at 20%)

SCREWDRIVER SETSCREWDRIVER SET
Part no: 00029098200
High quality 5 piece screw driver set in KTM design.



Availability: Stock item, normally sent out in 24-48 hrs
Price: 19.32 (Inc VAT at 20%)

HOLLOW-BLEEDER SCREWHOLLOW-BLEEDER SCREW
Part no: 77013920100
Make brake system bleeding as simple as possible. Change the original Banjo bolt on the brake caliper to this new bleeder screw with included holding valve. You just have to open the screw of the non-return valve a half turn and pump the brake fluid with the brake lever through the brake system. The holding valve avoids that air coming back into the system. Comes with anodized mud cap.



Availability: To order, normally sent out in 2-5 days
Price: 42.96 (Inc VAT at 20%)

Show First 12 Product(s)